Triquetra

$300.00

A triple shift register module that produces syncopated gates and stepped CV output. Each register can be clocked and looped independently.

Quantity:

A triple shift register module that produces syncopated gates and stepped CV output. Each register can be clocked and looped independently.

Triquetra is a linear feedback shift register module, with three independent registers that have their own Gate and CV output. The clock for the second and third register are normalled to the first, but can be supplied with their own clocks to get a wide range of versatility from the module. A clock source is required to generate bits. The toggle switch will change between Looped and Free Run mode.

Each register has an attenuator for the CV output.

The Gate mode can be switched from a 50% clock cycle when the last bit is high, to a high output as long as the last bit is high. This gives the result of switching between either a “Trigger” style or “Leggato” style Gate. The Gate mode can be switched at any time by pressing all three buttons at the same time.

Each button corresponds to the three registers, and will cycle through the bit generating algorithms (seven in total). The LED will cycle through different colors corresponding to the following:

RED = LFSR1

GREEN= LFSR2

RED/GREEN= Small Number Modulus

BLUE= Fibonacci Sequence

RED/BLUE= Prime Number Sequence

GREEN/BLUE= Large Number Modulus

RED/GREEN/BLUE= Otter Mods Cryptograph